9x18 makarov Chamber Reamer

involute 9x18 MakarovIMPORTANT!!!!!Friends, since April, we have been introducing updates, now on each of our products an original code will be applied.Enter this code on our website https://hammerbutton.com/checker/and check your product for originality.Now you are completely protected from fakes Dear friends, from the beginning of the new year, photos of our goods were stolen from the Ebay resource, and were put up for sale on various other resources.We are a manufacturer of this tool and officially declare that we trade only at two sites: Ebay and Amazon.if you meet a photo of our product somewhere else and are cheaper in cost, be sure these are cheap fakes.BUY ONLY THE ORIGINAL !!!!Yes, this tool was tested by the famous weapons engineer Mark Serbu))))Material: high-strength carbon steel Excellent Hardness: 84~90 HRA, which equal to 65~75HRC Hello dear buyer. We produce buttons for the production of barrel.Our combo buttons have two working surfaces so that both the bore and groove dimensions are controlled. No separate sizing button is needed.A special coating on the button allows it to use more than 500 repetitionswe can also make your measurements under the order.in the photo there is an example of work by our tool.Do not overpay, buy a good and working toolDear friends, please pay attention to the fact that our profile on deals exclusively with the sale of buttons, and all reviews are not hidden and you can read about them with respect to each instrument.Now a few facts why a real button can not cost less than $ 45-501). A good alloy for the production of one button costs from 10 to 15 $2). Each button is made manually with an accuracy of 0.01mm3) Our instrument is one of the only ones that is not manufactured in China and has been certified, and complies with all international standards. One and the same button does not apply to all calibres of the same size as China sells, for example, there can not be one 9mm button, since 9mm calibers are many 9x19, 9x18,9x17 and all buttons have different tolerances and different angles.4) Yes you can pay $ 20 less but you will lose your time, month for delivery and the result of the work will be incorrect We respect our customers, appreciate their time, so only the best qualityGood shopping friends Recommendations for using the button.Recommended steel grades for working with a button;Germany( DIN,WNr) 1.7223,41CrMo4;France( AFNOR) 42CD4TS ;Spain( UNE) 42CrMo4;England ( BS) 708M40;
USA  4140,4142Also very important is the thickness of the workpiece!Each wall of the workpiece before using the button should be 1.5-2.0 diameter bulletsAn example of calculating the diameter of the workpiece for the caliber 9mm Luger 9.02 (bullet diameter) * 1.5 = 13.53 minimum thickness of one wall13.53 + 13.53
9.02 = 36.08 The minimum rod diameter for this caliberWe also use lubrication.